PSS Shaft Seal 1-1/2" Shaft 2-1/2" Tube [02-112-212]
- Free worldwide shipping
- Low stock - 6 items left
- Inventory on the way
PSS Shaft Seal 1-1/2" Shaft 2-1/2" Tube
Shaft Diameter: 1-1/2"
Stern Tube Diameter (D): 2-1/2" to 2-5/8"
Total Length (A): 9.175"
Total Length (compressed) (Compressed A): 8.175"
Rotor Diameter (B): 3.75"
Carbon Cuff Diameter (C): 3.25"
Stern Cuff Length (E): 2"
The PSS Shaft Seal is the number one selling marine mechanical seal worldwide and is installed as standard equipment by many of the worlds most reputable boat builders / yards. The PSS Shaft Seal is also recognized as the premiere retrofit (aftermarket) seal on the world market. Certified by Bureau Veritas, ABS & Rina: Boat builders / yards recognize the advantages and value of installing the PSS as it eliminates the maintenance, constant adjustment & cost associated with traditional packing type glands. Aside from these benefits, the PSS Shaft Seal helps to eliminate water in the bilge (100% water tight) & wear to the propeller shaft. The PSS Shaft Seal can be easily retrofitted and is available for shafts ranging from 3/4" (20mm) to 6" (150mm).
The PSS Shaft Seal is a mechanical face seal that is created between the flat surfaces of the rotating stainless steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the vessels stern tube with hose clamps and the carbon flange is attached to the front side of the bellows with hose clamps. The stainless steel rotor is fit on the shaft in front of the carbon flange. The stainless steel rotor is used to compress the bellows before the collar is secured to the shaft with set-screws. This compression (pre-load) maintains contact between the faces and allows the PSS to compensate for the thrust from the propeller. The carbon flange is bored larger than the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration problems. The stainless steel collar is sealed to the shaft by two o-rings that are recessed into the bore of the collar. These o-rings rotate with the shaft and stainless steel rotor and do not experience wear during operation.
**As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests as preventative maintenance that the PSS bellow be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced."
Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings, five (5) set screws, four (4) new hose clamps and an allen key.
Brochure (pdf)
30-Day Returns & Fast Shipping
Most eligible items may be returned within 30 days of delivery. Items must be unused, uninstalled, and returned in their original condition with all original packaging, accessories, hardware, and components.
Returns caused by ordering the wrong item, incorrect vehicle or product fitment, incorrect size or quantity, accidental purchase, change of mind, or other customer error are subject to a minimum 20% restocking fee. Depending on the condition of the returned product, packaging, missing components, or other factors affecting resale value, the restocking fee may be increased up to a maximum of 50% of the product price. Customer-error returns may also be subject to return shipping costs.
Restocking fees do not apply when we verify that the wrong item was shipped by us or that the product arrived damaged or defective through no fault of the customer. Please contact 4Falcons before returning any item so we can provide return authorization and instructions.
Orders are processed and shipped as quickly as possible. Delivery dates are estimates and may be affected by carrier delays, weather, holidays, incorrect addresses, or other circumstances outside our control. Tracking information will be provided when available.
Please verify vehicle, RV, marine, or equipment compatibility before placing your order. Installed, used, modified, damaged, incomplete, or otherwise non-resalable products may receive a reduced refund or may not be eligible for return.
